Waterproof Original Taiwan Mean Well AC to DC Switching LED Power Supply LPC-150-350 LPC-150-500 LPC-150-700 LPC-150-1050 LPC-150-1400 LPC-150-1750 LPC-150-2100 LPC-150-2450 LPC-150-2800 LPC-150-3150

Item Specifcs

Brand Name: Mean Well	Place of Original: Taiwan, China
Model: LPC-100-350/500/700/1050/1400/1750/2100/2100/2450/2800/3150	Application: shop counters/ reception wall/ shop front,Outdoor,Indoor
Wattage: 151.5W	Power:

Description In The Box Installation Expert Advice Resources

Product Details

Model	LPC-150-350	LPC-150-500	LPC-150-700	LPC-150-1050	LPC-150-1400	LPC-150-1750	LPC-150-2100	LPC-150-2450	LPC-150-2800	LPC-150-3150
Input	180 ~ 305VAC / 254VDC ~ 431VDC (It says AC100~ 240V in the items)
Output	DC 215~430V 350mA	DC 150~300V 500mA	DC 107~215V 700mA	DC 72~144V 1050mA	DC 54~108V 1400mA	DC 43~86V 1750mA	DC 36~72V 2100mA	DC 31~62V 2450mA	DC 27~54V 2800mA	DC 24~48V 3150mA
Work Efficiency	90%	90%	90%	90%	90%	90%	90%	90%	90%	90%
Size	1916337.5mm
Weight	0.74kg/piece, 20 pcs/carton
Certification	CE, EMC

| Features

Constant current design

180~305VAC input only

High efficiency up to 90%

Protections: Short circuit / Over voltage / Over temperature

Cooling by free air convection

Fully encapsulated with IP67 level (Note.6)

Fully isolated plastic case

ClassIIpower unit, no FG

Suitable for LED lighting and moving sign application (Note.7)

100% full load burn-in test

Low cost, high reliability

2 years warranty (Note.4)

| Specification

one Mean Well LPC-150-350, LPC-150-500, LPC-150-700, LPC-150-1050, LPC-150-1400, LPC-150-1750, LPC-150-2100, LPC-150-2450, LPC-150-2800 or LPC-150-3150 Power Supply.

Notes on choosing a switching power supply?

Ans:

To increase the reliability of the S.P.S., we suggest users choose a unit that has a rating of 30% more power than actual need. For example, if the system needs a 100W source, we suggest that users choose a S.P.S. with 130W of output power or more. By doing this, you can effectively boost the reliability of the S.P.S. in your system.
We also need to consider about ambient temperature of the S.P.S. and whether there is additional device for dissipating the heat. If the S.P.S. is working in a high temperature environment, we need to make some derating to the output power. The derating curve of "ambient temperature" versus "output power" can be found on our spec sheets.
Choosing functions based on your application:
1. Protection function: Over Voltage Protection (OVP), Over Temperature Protection (OVP), Over Load Protection (OLP), and etc.
2. Application function: Signaling Function (Power Good, Power Fail), Remote Control, Remote Sensing, and etc.
3. Special function: Power Factor Correction (PFC), Uninterruptible Power Supply (UPS) function.
Make sure that the model qualifies for the safety standards and EMC regulations you need.

Why the input voltage marked on the spec. sheet is 88~264 VAC while the label on the power supply says that it is 100~240VAC?

Ans:

During safety verification process, the agency will use a stricter standard -- ?0%(IEC60950 uses +6%, -10%) of the input voltage range labeled on the power supply to conduct the test. So, operating at the wider input voltage range as specified on the spec. sheet should be fine. The narrower range of input voltage labeled on the power supply is to fulfill the test standard of safety regulation and make sure that users insert input voltage correctly.

LPC-150 series Specification. pdf