Waterproof Original Taiwan Mean Well AC to DC Switching LED Power Supply LPVL-150-12 LPVL-150-24

Item Specifcs

Brand Name: Mean Well	Place of Original: Taiwan, China
Model: LPVL-150-12/24	Application: shop counters/ reception wall/ shop front,Indoor,Outdoor
Wattage: 151.2W	Power:

Description In The Box Installation Expert Advice Resources

Product Details

Model	LPV-100-12	LPV-100-24
Input	90~132VAC 254 ~ 370VDC (It says AC100~ 240V in the items)
Output	DC 12V 8.5A	DC 24V 4.2A
Work Efficiency	85%	88%
Size	1905237mm
Weight	0.85kg/piece, 20pcs/carton
Certification	FCC, UL_E320521, UL_E334687, EMC

| Features

Constant voltage design

90~132VAC input for LPVL-150

Fully encapsulated with IP67 level (Note.8) Class II power unit, no FG

Protections: Short circuit/Overload/Over voltage/

Over temperature

Fully isolated plastic case

Fanless design, cooling by free air convection

100% full load burn-in test

Low cost, high reliability

Listed in UL Sign Component Manual (SAM)

Type “HL” for use in class I, Division 2 hazardous (Classified) location luminaires for LPVL-150

2 years warranty

| Description

LPV-150 and LPVL-150 are 150W single output power supplies that specifically and perfectly work for LED lighting and LED moving sign applications. As a class II power unit, these two series are housed with the UL 94V-0 rated flame retardant plastic enclosure. The IP67 design allows every model to fit the use at dry, damp and wet locations. Both series are constant voltage mode design that various models with 12V, 15V, 24V, 36V and 48V are offered for LPV-150 where as 12V and 24V are provided for LPVL-150.

| Specification

one Mean Well LPVL-150-12 or LPVL-150-24 Power Supply

Notes on choosing a switching power supply?

Ans:

To increase the reliability of the S.P.S., we suggest users choose a unit that has a rating of 30% more power than actual need. For example, if the system needs a 100W source, we suggest that users choose a S.P.S. with 130W of output power or more. By doing this, you can effectively boost the reliability of the S.P.S. in your system.
We also need to consider about ambient temperature of the S.P.S. and whether there is additional device for dissipating the heat. If the S.P.S. is working in a high temperature environment, we need to make some derating to the output power. The derating curve of "ambient temperature" versus "output power" can be found on our spec sheets.
Choosing functions based on your application:
1. Protection function: Over Voltage Protection (OVP), Over Temperature Protection (OVP), Over Load Protection (OLP), and etc.
2. Application function: Signaling Function (Power Good, Power Fail), Remote Control, Remote Sensing, and etc.
3. Special function: Power Factor Correction (PFC), Uninterruptible Power Supply (UPS) function.
Make sure that the model qualifies for the safety standards and EMC regulations you need.

Why the input voltage marked on the spec. sheet is 88~264 VAC while the label on the power supply says that it is 100~240VAC?

Ans:

During safety verification process, the agency will use a stricter standard -- ?0%(IEC60950 uses +6%, -10%) of the input voltage range labeled on the power supply to conduct the test. So, operating at the wider input voltage range as specified on the spec. sheet should be fine. The narrower range of input voltage labeled on the power supply is to fulfill the test standard of safety regulation and make sure that users insert input voltage correctly.

LPVL-150 series Specification. pdf

LPVL-150-12 Report. pdf | LPVL-150-24 Report. pdf

LPVL-150 Certificate

FCC Certificate | UL Certificate_E320521 | UL Certificate_E334687 | EMC Certificate